Gosh, yes, it's been over two weeks since my last post. Boring, busy life intrudes. But I've been thinking about guitar-related items to post and this cloudy, rainy day seems the perfect time.
Despite my better judgement (and my own advice) I changed the strings on the Tetomas acoustic. Yeah, I know I said I wouldn't do it. I know I said I'd leave it to the professionals, but (shrug) eh, whaddaya gonna do? It was almost a challenge I couldn't resist. Besides, I had the strings.
The first thing I did was inspect the pawnshop Fender and see what I did wrong. I knew I'd wound one side wrong and John said I needed to have more string winds around the posts. I made a diagram:
Making the diagram, I got the fundamentals pretty well entrenched in my brain and I went for it. I removed the old strings and polished up the wood as well as I could. It's an old, scratched up guitar but it looks better for the effort. The neck in particular. It was nasty-dirty!
I started with the 1st string, what I call "e." I wasn't sure how much slack to leave, exactly, in order to have enough for winding around the posts so it was purely trial and error. Mostly error, I'm sure.
Do overs |
At first, I didn't think I'd left enough so I took it apart and started over, and on a few I knew I had too much. I'd have to take it apart and start over again. It got to be pretty funny, actually. That's one good thing about being able to laugh at yourself. This isn't a life or death situation.
Of course, the more I took the strings off, the curlier they got and more unmanageable they became. Patience and humility were my friends in this project. Eventually, I got them all installed. Some have more wound around the posts and some have less, but I think they at least all have enough.
Before trimming |
Tuning
So now comes the tuning. I'm not too bad at tuning since I have a keyboard which I can use for reference. The trouble I've always had with tuning is breaking the "G" string. It's ridiculous. I've got a couple of packages of strings that are missing the "G" because of breakage. Duh.
I've discussed this with John and he showed me how to stretch the strings while tightening them up during the re-stringing process. As the slack becomes less, you push the strings to the side with your fingers, not too much--don't pull the pegs out-- but enough that tension is evident. Do this often during the process and breaking a string while tuning shouldn't be an issue.
For lessons, John tunes my guitar to match his using a Korg electronic tuner. Turns out, either my husband or my brother gave me one exactly like it years ago, but I was never very confident using it. After seeing John utilize it, I've used it a little more, though I still prefer my ears and the keyboard.
The way the Korg works is, one end of the cable is plugged into the guitar and the other end is plugged into the tuner. As each string is struck, an indicator needle and lights tell how far off, or on, the note it is. Since I've been using it the nights before my lessons, I've been pretty close to perfect when I get there. It's a neat little gadget.
Plug-in end of the Korg electronic tuner |
So there ya' have it. I trimmed up the ends of the strings to about an inch/inch and a half, and it sure does look a lot nicer. I haven't thought much about changing the strings on the electric. Probably a good thing.
By the way, I used strings that had been around here a while, but were still sealed up in their original plastic bag, so they were still good. I'm not sure how I came to have so many full sets of strings--I guess one of the music stores was having a 3/$10.00 or a BOGO sale. They are all D'Addarios. There is one set of Martin acoustic strings--missing the "G" of course.
No comments:
Post a Comment